Quick Drainage Trough 2,85 m with DE LUXE plug holder

Conical inclined trough in stainless steel for wall mounting
Anti-spillage rim – water wastage reduced to a minimum
Float valve cover can be pivoted upwards without use of tools!
Installed float valve MASTERFLOW, water flow up to 40 l/min (11 gallons/min), ¾" male connection.
Plug inclusive plug holder DE LUXE! Drainage plug can be operated above water surface!
Large hole for quick drainage; with holder for drainage tube
With overflow hole in plug: surplus water of frost frost protection guard can be flushed through this hole.
Volume:
- 130.6714: 100 l
- 130.6719: 130 l
- 130.6723: 160 l
- 130.6728: 200 l
- 130.6742: 280 l

Notes for 4,2 m-variant (130.6742)

Extra long 4,2 m trough
Suitable for large animal housings: 3,7 m inner trough length provides from 37 up to 46 dairy cows with water (8 – 10 cm trough length for each animal)
Only for mounting on a concrete wall in the middle of crossings in front of cubicles
Easy transportation thanks to a modular execution made of two parts. The seam of two parts is sealed with silicone and screwed with stainless steel bolts.

Accessory notes:

Legs (131.6031, 1 set = 4 pieces)
Additional float valve (131.0700 or 131.0738) e.g. for warmed-up water from the milk cooling system (not possible if circuit pipe is installed).
Protection plate (131.6090) to cover connections at the valve side prevents biting into frost protection heating cables and insulation.

Pressure

max. 5 bar / 72,5 psi (high pressure)

Recommended for

milk cows

Thread size

¾"

Heatable

Yes (electric)

Suitable for circuit

yes

Bowl material

stainless steel

Valve type

float valve

Valve material

brass

Reference

130.6728

GTIN-code

4025338333787

Heating element under the trough

Easy fixation under the trough
No sharp edges when cleaning the trough
Provides frost protection of the trough down to approx. -20°C
For a frost-free feed pip: frost protection heating cable 24 V (20 W, 2 m, 101.0861) or 30 W, 3 m, 101.1863). The heating cable is connected parallel to the heating element.
For power supply a SUEVIA Transformer 230/24 V is necessary. For automatic switch on/off a thermostat (101.0389) can be additionally installed.
Benötigte Zusatzheizung:
- 130.6714: 131.6060 24 V, 180 W
- 130.6719: 131.6061 24 V, 180 W
- 130.6723: 131.6062 24 V, 360 W
- 130.6728: 131.6062 24 V, 360 W
- 130.6742: 131.6062 24 V, 360 W

Heating element in the trough

Heating element (24 V, 180 W, 131.6063), with stainless steel cover and cable connection box inclusive. Frost protection of trough down to -20°C. For installation only four holes have to be drilled into the trough’s bottom according plan. For power supply a SUEVIA Transformer 230/24 V is necessary. For automatic switch on/off of transformer a thermostat (101.0389) can be additionally installed (see p. 26). For a frost-free feed pip: frost protection heating cable 24 V (20 W, 2 m, 101.0861) or 30 W, 3 m, 101.1863). The heating cable is connected parallel to the heating element.