Menu

Drinking bowl Mod. 46-MS¾" 24 V, 80 W

  • Heated drinking bowl with smoothly running tube valve for wall and pipe mounting
  • Frost-protected down to approx. -15°C. Remaining water in the bowl will not freeze.
  • With subsequent installation of valve heating (24 V, 5 W, Ref. 101.1405), supplied on demand, is frost-protected down to -35°C!
  • Drinking bowl made of cast iron, completely enamelled
  • One drinker is sufficient for 15 – 20 animals
  • Easy access to installed heating element, which is installed out of reach for the animals between the two bowl parts
  • Smoothly running tube valve in ¾" brass or in ¾" stainless steel with female connection from top and male connection from bottom
  • Water flow continuously adjustable from outside by means of a regulation screw
  • Capacity of the heating element 80 W/24 V – few power consumption
  • Installation on the wall or on 2" – 3" (60 - 89 mm) pipes
  • For power supply SUEVIA Transformer 230/24 V is necessary
  • (for correct choice of transformer see p. 30)
  • To ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m (Ref. 101.0861), or a 24 V, 30 W, 3 m (Ref. 101.1863) has to be used. The heating cable should be wrapped around the pipe and connected to the heating element of the drinker in parallel to the power supply cable, coming from the transformer.
  • If the heating cable is installed on plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution the water pipe has to be wrapped with an aluminium adhesive tape (Ref. 101.1099) and insulated.
Pressure
max. 5 bar / 72,5 psi (high pressure)
Recommended for
bulls (without nose ring), calves, horses, cattle
Thread size
¾"
Heated
Yes (electric)
Bowl material
cast iron enamelled
Valve type
tube valve
Valve material
brass
Reference
100.1463
GTIN-code
4025338120981