- Cattle
- Horses
- Sheep and goats
- Pigs
- Drinking bowls for piglets
- Drinking bowls for fattening pigs
- Drinking bowls for soas and boars
- Drinking bowls for sows with piglets
- Heated drinking bowls, heating units
- Bite nippels for piglets
- Nipple drinker for fattening pigs
- Nipple drinkers for sows and boars
- Spraying nipple for pigs
- Pin valves for pigs
- Pipes
- Fittings
- Disinfection bath for boots, carcass cover
- Animal breeding products pigs
- Zoo-animals
Double trough drinker 620 with float valve
- For all free stalls – space-saving design!
- Completely made of stainless steel
- With float valve: constant water level
- Continual and efficient drinking of the animals thanks to installed high-performance MAXIFLOW float valve, water flow up to 40 l/min
- Ideal for animals with nose rings or anti suction ring
- Connection to a water circuit means of a connection set for ¾" water circuits
- Bowl covered towards the upper lip to prevent dirt entry
- Suited for wall or tube mounting
Options for frost protection
Frost protection by Heating Element
If frost protection in case of Model 600/620 is desired, a heating element (24 V) is fixed under the trough. In order to ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m (Ref. 101.0861), or a 24 V, 30 W, 3 m (Ref. 101.1863) is wrapped around the pipe and connected to the heating element in parallel to the power supply cable, coming from the transformer. The heating cable and the water line have to be insulated, however, additionally and protected against biting. For power supply a SUEVIA Transformer 230/24 V is necessary. For automatic switch on/off of transformer a thermostat (Ref. 101.0389) can be additionally installed.- For both Models: Heating element Model 524 (Ref. 131.0524), 24 V, 80 W: to maintain the water frost-protected in the trough.
- For Model 620: we recommend the use of two heating elements
Increased frost protection of the valve, down to -30°C
A valve heating (24 V, 7 W, 131.0527) can be additionally installed. Suited for Mod. 600 and Mod. 620.Connection to a feed pipe
To ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m (Ref. 101.0861), or a 24 V, 30 W, 3 m (Ref. 101.1863) has to be used. The heating cable should be wrapped around the pipe and connected to the heating element of the drinker in parallel to the power supply cable, coming from the transformer. If this heating cable is installed on plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution the water pipe has to be wrapped first with an aluminium adhesive tape (Ref. 101.1099).Connection to a water circuit
- In combination with a SUEVIA connection set for ¾" water circuits (Ref. 103.1984, 103.3004) an easy integration of Model 600/620 into a water circuit is possible! For connection to a water circuit we recommend heating units.
- In order to prevent water in the bowl from freezing, use additionally a heating element Model 524. Transformer necessary!
- For extremely cold areas a valve heating (24 V, 7 W, 131.0527) is recommended for increased frost protection (suited for both troughs).
Pressure
max. 5 bar / 72,5 psi (high pressure)
Recommended for
milk cows, cattle (with anti-suction ring)
Thread size
¾"
Heated
Yes (electric)
Bowl material
stainless steel
Valve type
float valve
Valve material
brass
Reference
130.0620
GTIN-code
4025338044683