NEW

Trough drinker Mod. 610 with one feed pipe

The only drinking trough with a constant water level, made of stainless steel, robust, with safe water inlet from below, suitable for installation between two pens.
Large bowl made of very robust stainless steel, sheet thickness 2 mm, reinforced, with anti-spillage rim!
Safety for the animal with 45-degree bevels at the front
Fast and efficient watering thanks to a float with a high flow rate of up to 35 l/min at max. 5 bar (72,5 psi). Constant water level - easy adjustment! With stainless steel lever!
Water volume from 13 - 21 liters (min - max)
Safe access for quick emptying from the feeding table
Equipped with a large 60 mm hole for quick drainage
130.6100: feedpipe ¾" from below
130.6101: circuit pipe ¾" from below, 2x ¾" male, Circuit pipes welded in. For connection to a water circuit we recommend SUEVIA heating units (see p. 32-35). Only for regions with a weak winter, due to the low heat input.
130.6105: heated version, including additional 24 V, 80 W heating under the trough with mounting brackets. To keep the valve frost-free, an optional 24 V heating cable can be used through the second pipe. The image shows a free space of approx. 40 cm from the floor, in which case a 2 m heating cable is sufficient to supply the supply line and valve. Water connection with branch line or ring line routed underneath with T-piece. The images show the optional heating cable and the optional protective cover.
Can be attached to a wall or H-post. Round and octagonal posts 102 and 140 mm, with welded plate on the post