Round Trough 1,5 m stainl. steel,without fixation

Trough with stainless steel pipe rim
The stainless steel pipe encloses completely the trough
The float valve cover is inclined towards all sides avoiding any risk of injury
Anti-spillage rim – water wastage reduced to a minimum
Installed float valve MASTERFLOW, water flow up to 40 l/min
(11 gallons/min), ¾" male connection at the front side
Float valve cover can be pivoted upwards without use of tools
Large hole for quick drainage
With holder for drainage tube (tube DN 125 to be provided on site)
With hole at the side of the trough: If frost protection guard is installed (see beneath), excessive water produced by frost protection guard is channelled through hole
Rounded rim trough will be delivered without consoles, suitable consoles (for wall, ground or post fixation) have to be chosen as accessory.

Options for Frost Protection

Connection to a water circuit

¾" circuit pipe in stainless steel (Ref. 131.6064). If connected to a water circuit and in combination with a SUEVIA heating unit, frost protection is reached for the water line as well as for the water in the trough.
Connection set for 1" water circuits, the free space around the valve allows installation of a 1" circuit pipe in the trough with fittings. This is a possibility for areas with short and mild periods of frost.
Circuit pipe 1", through the whole trough, can be delivered on demand.

Frost protection guard

SUEVIA frost protection guard with connection parts (Ref. 131.0519). For subsequent installation into SUEVIA Rounded rim troughs. Consists of a thermostat valve and drainage kit (¾" flexible tube connection). Frost protection without electricity! At risk of frost the installed and adjusted frost protection guard opens automatically, the adjusted water quantity flows into the trough: water in the trough remains in motion and is prevented from freezing! Surplus water produced by the frost protection guard is channeled well directed through the drainage kit, which is mounted opposite to the float valve at the rear side of the trough.

Pressure

max. 5 bar / 72,5 psi (high pressure)

Recommended for

milk cows

Thread size

¾"

Heatable

Yes (electric)

Suitable for circuit

yes

Bowl material

stainless steel