Frost protection heating cable 230 V, 33 W, 2 m

• Heating cable with thermostat at the beginning. Heating power ~15-18 W/m.
• Cable structure: Plug 230 V, 2 m (6,6") connecting cable (cold), Thermostat, heating cable (length depending on type).

Mounting instructions: Installation has to be done in parallel to the steel tube underside. Even in very cold ambient temperatures the frost protection heating cable prevents cold water pipes (up to 1" ) from freezing. The thermostat has to be mounted in the coldest place and automatically switches on at +5°C (41°F) and off when temperature is higher than +15°C (59°F). The water line pipes must be insulated. In the area of animals the cable has to be protected against being bitten by the animals or other damages. The heating cable must not be shortened! Remaining rests can be winded around the steel pipe. SUEVIA frost protection heating cables are available in indicated fix lengths. A residual current device has to be provided by the customer.
If this heating cable is installed on appropriate plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution the plastic water pipe has to be wrapped first with an aluminium adhesive tape (Ref. 101.1099).